Table 5-4 Commands And Levels - Lantronix SGX 5150 Command Reference Manual

•
•
accept (tunnel-accept:4) level commands
accept mode always
accept mode any charac-
ter
accept mode disable
accept mode modem
control asserted
accept mode modem
emulation
accept mode start char-
acter
aes decrypt key <hexa-
decimal>
aes decrypt key text
<text>
aes encrypt key <hexa-
decimal>
aes encrypt key text
<text>
block network disable
block network enable
block serial disable
block serial enable
SGX™ 5150 IoT Device Gateway Command Reference
•
host 7 (tunnel-connect-host:4:7)
•
host 8 (tunnel-connect-host:4:8)
•
host 9 (tunnel-connect-host:4:9)
•
host 10 (tunnel-connect-host:4:10)
•
host 11 (tunnel-connect-host:4:11)
•
host 12 (tunnel-connect-host:4:12)
•
host 13 (tunnel-connect-host:4:13)
•
host 14 (tunnel-connect-host:4:14)
•
host 15 (tunnel-connect-host:4:15)
•
host 16 (tunnel-connect-host:4:16)
•
disconnect (tunnel-disconnect:4)
•
modem (tunnel-modem:4)
•
packing (tunnel-packing:4)
•
serial (tunnel-serial:4)
usb 1 (usb-line:1)
xml (xml)

Table 5-4 Commands and Levels

Enables the tunneling server to always accept tunneling connections.
Enables the tunneling server to accept tunneling connections only when a character is re-
ceived through the corresponding line (serial port).
Disables accept mode tunneling.
Enables the tunneling server to accept tunneling connections when the modem control pin
is asserted.
Enables modem emulation for accept mode tunneling.
Enables accept mode tunneling when the configured start character is received on the line.
Sets the accept tunnel AES decrypt key with up to 16 bytes. Each byte is represented by
two adjacent hex digits. Bytes may run together or be separated by optional punctuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value
if it contains spaces.
Sets the accept tunnel AES decrypt key with up to 16 bytes. Each byte is represented by a
single character. Note that quotes must enclose the value if it contains spaces.
Sets the accept tunnel AES encrypt key with up to 16 bytes. Each byte is represented by
two adjacent hex digits. Bytes may run together or be separated by optional punctuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value
if it contains spaces.
Sets the accept tunnel AES encrypt key with up to 16 bytes. Each byte is represented by a
single character. Note that quotes must enclose the value if it contains spaces.
Forwards (tunnels) network data in accept mode tunneling.
Discards all data coming in from the accept mode tunnel before forwarding it to the serial
interface (generally used for debugging).
Forwards (tunnels) serial data in accept mode tunneling.
Discards all data coming in from the serial interface before forwarding it to the accept mode
tunnel (generally used for debugging).
5: Commands and Levels
65