Lantronix SGX 5150 Command Reference Manual page 105

subject <text>
to <text>
write
email 13 (email:13) level commands
auto show statistics
cc <text>
clear log
clear mail counters
clrscrn
default priority
email <number>
exit
message file <text>
no cc
no clear mail counters
no message file
no reply to
no subject
no to
priority high
priority low
priority normal
priority urgent
priority very low
reply to <text>
send
show
show history
show log
show statistics
subject <text>
to <text>
write
email 14 (email:14) level commands
auto show statistics
cc <text>
clear log
clear mail counters
clrscrn
default priority
SGX™ 5150 IoT Device Gateway Command Reference
Sets the Subject for email alerts. <text> = text to placed as the subject.
Sets To addresses for email alerts. <text> = a quoted, semicolon separated list of email
addresses.
Stores the current configuration in permanent memory.
Continuously displays email statistics.
Sets Cc addresses for email alerts. <text> = a quoted, semicolon separated list of email
addresses.
Clears all entries from the mail log.
Sets the email counters to zero.
Clears the screen.
Sets X-Priority for email alerts to 3 (normal).
Enters the configure email level.
Exits to the enable level.
Specifies a text file, the contents of which will be the message body of an email alert.
<text> = the name of a local file.
Removes the Cc addresses for email alerts.
Restores the email counters to the aggregate values.
Removes the file name, so the message body will be empty.
Removes the Reply To address for email alerts.
Removes subject used for email alerts.
Removes the To addresses for email alerts.
Sets X-Priority for email alerts to 2 (high).
Sets X-Priority for email alerts to 4 (low).
Sets X-Priority for email alerts to 3 (normal).
Sets X-Priority for email alerts to 1 (urgent).
Sets X-Priority for email alerts to 5 (very low).
Sets the Reply To address for email alerts. <text> = email address to place in the Reply To
field of the email alert.
Sends an email using the current settings.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Displays the email log.
Displays email statistics.
Sets the Subject for email alerts. <text> = text to placed as the subject.
Sets To addresses for email alerts. <text> = a quoted, semicolon separated list of email
addresses.
Stores the current configuration in permanent memory.
Continuously displays email statistics.
Sets Cc addresses for email alerts. <text> = a quoted, semicolon separated list of email
addresses.
Clears all entries from the mail log.
Sets the email counters to zero.
Clears the screen.
Sets X-Priority for email alerts to 3 (normal).
5: Commands and Levels
105