Lantronix SGX 5150 Command Reference Manual page 344

default scan interval
default scan threshold
2.4ghz
default scan threshold
5ghz
exit
level custom
level high
level low
level medium
roaming disable
roaming enable
rssi delta 2.4ghz <dBm> Sets the RSSI Delta value for 2.4GHz band.
rssi delta 5ghz <dBm>
scan interval <seconds> Sets the scan interval.
scan threshold 2.4ghz
<text>
scan threshold 5ghz
<text>
show
show history
write
smtp (config-smtp) level commands
clrscrn
default local port
default server port
exit
from address <text>
local port <number>
no from address
no overriding domain
no password
no server address
no username
overriding domain <text> Sets a domain name that will be used when connecting to an SMTP server to send an
password <text>
server address <text>
server port <number>
show
show history
username <text>
write
snmp (config-snmp) level commands
SGX™ 5150 IoT Device Gateway Command Reference
Restores the default scan interval based on current roaming level.
Restores the default Threshold value for 2.4GHz band based on current roaming level.
Restores the default Threshold value for 5GHz band based on current roaming level.
Exit back to interface configuration level
Sets the roaming level to Custom.
Sets the roaming level to High.
Sets the roaming level to Low.
Sets the roaming level to Medium.
Disables Smart Roaming.
Enables Smart Roaming.
Sets the RSSI Delta value for 5GHz band.
Sets the Threshold value for 2.4GHz band.
Sets the Threshold value for 5GHz Band.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Stores the current configuration in permanent memory.
Clears the screen.
Clears the local port for SMTP client.
Restores the SMTP server port to its default.
Exits to the configuration level.
Sets the From address for email alerts. <text> = email address to place in the From field of
the email alert.
Sets the local port for SMTP client.
Removes the From address for email alerts.
Removes the overriding domain name option.
Removes the password.
Removes the SMTP server address.
Removes the username.
email alert instead of the device domain name in EHLO. <text> = domain name to override
the current domain name in EHLO.
Sets the password for logging in to the mail server.
Sets an SMTP server address to direct all outbound email messages through a mail serv-
er.
Sets the SMTP server port.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Sets the username for logging in to the mail server.
Stores the current configuration in permanent memory.
5: Commands and Levels
344