Lantronix SGX 5150 Command Reference Manual page 256

protocol tcp aes
protocol telnet
protocol udp
protocol udp aes
secure protocols ssl3
disable
secure protocols ssl3
enable
secure protocols tls1.0
disable
secure protocols tls1.0
enable
secure protocols tls1.1
disable
secure protocols tls1.1
enable
secure protocols tls1.2
disable
secure protocols tls1.2
enable
show
show history
show statistics
ssh username <text>
tcp keep alive <millisec-
onds>
tcp keep alive interval
<milliseconds>
tcp keep alive probes
<number>
tcp user timeout <milli-
seconds>
validate certificate disa-
ble
validate certificate enable Requires verification of the server certificate when connecting.
write
host 4 (config-host:4) level commands
clrscrn
default protocol
default remote port
exit
host <number>
name <text>
no name
no remote address
no ssh username
protocol ssh
SGX™ 5150 IoT Device Gateway Command Reference
Uses TCP protocol with AES encryption for connect mode tunneling.
Uses Telnet protocol (with IAC) for connect mode tunneling.
Uses UDP protocol for connect mode tunneling.
Uses UDP protocol with AES encryption for connect mode tunneling.
Disables the protocol.
Enables the protocol.
Disables the protocol.
Enables the protocol.
Disables the protocol.
Enables the protocol.
Disables the protocol.
Enables the protocol.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI session.
show connection statistics
Sets the SSH user name for use when establishing tunneling connections with other devic-
es. <text> = SSH user name.
Sets the TCP keep alive idle time. This is the initial keep alive timeout. <milliseconds> =
timer value, in milliseconds.
Enables TCP keep alive for connect mode tunneling and sets the timer. <milliseconds> =
TCP keep alive for connect mode in milliseconds.
Sets the number of TCP keep alive probes. <number> = number of TCP keep alive probes.
Sets the timeout for TCP retransmissions. <milliseconds> = timeout value, in milliseconds.
Skips verification of the server certificate when connecting.
Stores the current configuration in permanent memory.
Clears the screen.
Restores the default value of the protocol (Telnet).
Sets the remote port (used to connect to the host) to the default value, which depends on
the selected protocol.
Exits to the configuration level.
Change to config host level
Sets the name of the host. <text> = name of the host.
Clears the name of the host.
Clears the remote address of the host.
Clears the SSH username associated with the host.
Sets the protocol to SSH.
5: Commands and Levels
256