Lantronix SGX 5150 Command Reference Manual page 298

ipv4 state disable
ipv4 state enable
ipv6 address <ipv6 ad-
dress/prefix>
ipv6 auto configure ena-
ble
ipv6 default gateway
<ipv6 address>
ipv6 dhcp enable
ipv6 domain <text>
ipv6 primary dns <ipv6
address>
ipv6 state enable
link
mtu <bytes>
no default gateway
no dhcp client id
no domain
no hostname
no ip address
no ipv6 address
no ipv6 default gateway
no ipv6 domain
no ipv6 primary dns
no ipv6 secondary dns
no primary dns
no secondary dns
primary dns <IP ad-
dress>
priority <number>
qos
secondary dns <IP ad-
dress>
show
show history
show status
state disable
state enable
write
ip (config-ip) level commands
SGX™ 5150 IoT Device Gateway Command Reference
Disables IPv4 for the interface.
Enables IPv4 for the interface.
Sets the IPv6 static address. IPv6 addresses are written in eight groups of four hexadeci-
mal digits separated by colons, such as 2001:0db8:85a3:0000:0000:8a2e:0370:7334 Net-
work address ranges are written in CIDR notation. A network is denoted by the first ad-
dress in the block (ending in all zeroes), a slash (/), and a decimal value equal to the size
in bits of the prefix
Enables IPv6 stateless address autoconfiguration.
Sets the IPv6 default gateway. IPv6 addresses are written in eight groups of four hexadec-
imal digits separated by colons, such as 2001:0db8:85a3:0000:0000:8a2e:0370:7334 Net-
work address ranges are written in CIDR notation. A network is denoted by the first ad-
dress in the block (ending in all zeroes), a slash (/), and a decimal value equal to the size
in bits of the prefix
Enables IPv6 DHCP.
Sets the IPv6 domain name. <text> = name of the domain.
Sets the IPv6 address of the primary DNS server. IPv6 addresses are written in eight
groups of four hexadecimal digits separated by colons, such as
2001:0db8:85a3:0000:0000:8a2e:0370:7334 Network address ranges are written in CIDR
notation. A network is denoted by the first address in the block (ending in all zeroes), a
slash (/), and a decimal value equal to the size in bits of the prefix
Enables IPv6 for the interface.
Enter link configuration level
Sets the Maximum Transmission Unit (MTU) size.
Clears the default gateway.
Clears the DHCP client ID.
Clears the domain name.
Clears the host name.
Clears the IP address.
Clears the IPv6 static address.
Clears the IPv6 default gateway.
Clears the IPv6 domain name.
Clears the IPv6 address of the primary DNS server.
Clears the IPv6 address of the secondary DNS server.
Clears the name of the primary DNS server.
Clears the name of the secondary DNS server.
Sets the IP address of the primary DNS server.
Sets the priority for interface. <number> = priority number.
Enter QoS configuration level
Sets the IP address of the secondary DNS server.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Show interface status
Disables the interface.
Enables the interface.
Stores the current configuration in permanent memory.
5: Commands and Levels
298