Lantronix SGX 5150 Command Reference Manual page 240

remote port <number>
show
show history
ssh username <text>
write
host 26 (config-host:26) level commands
clrscrn
default protocol
default remote port
exit
host <number>
name <text>
no name
no remote address
no ssh username
protocol ssh
protocol telnet
remote address <text>
remote port <number>
show
show history
ssh username <text>
write
host 27 (config-host:27) level commands
clrscrn
default protocol
default remote port
exit
host <number>
name <text>
no name
no remote address
no ssh username
protocol ssh
protocol telnet
remote address <text>
remote port <number>
show
show history
ssh username <text>
write
SGX™ 5150 IoT Device Gateway Command Reference
connect menu. <text> = IP address.
Sets the remote port used to connect to the host. <number> = port to be used.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Sets the username for logging into the host via SSH. <text> = username.
Stores the current configuration in permanent memory.
Clears the screen.
Restores the default value of the protocol (Telnet).
Sets the remote port (used to connect to the host) to the default value, which depends on
the selected protocol.
Exits to the configuration level.
Change to config host level
Sets the name of the host. <text> = name of the host.
Clears the name of the host.
Clears the remote address of the host.
Clears the SSH username associated with the host.
Sets the protocol to SSH.
Sets the protocol to Telnet.
Sets the IP address of the remote host to connect to when this host is selected on the login
connect menu. <text> = IP address.
Sets the remote port used to connect to the host. <number> = port to be used.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Sets the username for logging into the host via SSH. <text> = username.
Stores the current configuration in permanent memory.
Clears the screen.
Restores the default value of the protocol (Telnet).
Sets the remote port (used to connect to the host) to the default value, which depends on
the selected protocol.
Exits to the configuration level.
Change to config host level
Sets the name of the host. <text> = name of the host.
Clears the name of the host.
Clears the remote address of the host.
Clears the SSH username associated with the host.
Sets the protocol to SSH.
Sets the protocol to Telnet.
Sets the IP address of the remote host to connect to when this host is selected on the login
connect menu. <text> = IP address.
Sets the remote port used to connect to the host. <number> = port to be used.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Sets the username for logging into the host via SSH. <text> = username.
Stores the current configuration in permanent memory.
5: Commands and Levels
240