Lantronix SGX 5150 Command Reference Manual page 117

hostname <text>
interval <seconds>
method icmp
method tcp
no hostname
show
show history
show status
state disable
state enable
test
timeout <seconds>
write
filesystem (filesystem) level commands
cat <file>
cd <directory>
clrscrn
cp <source file> <desti-
nation file>
dump <file>
exit
format
ls
ls <directory>
mass storage
mkdir <directory>
mv <source file> <desti-
nation file>
pwd
rm <file>
rmdir <directory>
show
show history
show statistics
show tree
tftp get <source file>
<destination file> <host>
tftp get <source file>
<destination file> <host>
<port>
tftp put <source file>
<destination file> <host>
tftp put <source file>
<destination file> <host>
<port>
touch <file>
filter 1 (config-ethernet-qos-filter:usb0:1) level commands
SGX™ 5150 IoT Device Gateway Command Reference
Sets the host name. <text> = name of the host to ping.
Sets the Ping interval in seconds.
Ping using ICMP-ECHO.
Ping using TCP.
Clears the host name.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Show failover status
Disables Failover.
Enables Failover.
Test failover configuration
Sets the Ping response timeout in seconds.
Stores the current configuration in permanent memory.
Show the contents of a file
Change the current directory to the specified directory
Clears the screen.
Copy an existing file
Show contents of a file as a hex dump
Exits to the enable level.
Format the file system and lose all data
Show all files and directories in the current directory
Show all files and directories in the specified directory
Enters the next lower level.
Create a directory
Move a file on the file system
Print working directory
Remove a file
Remove a directory
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Show file system statistics
Show all files and directories from current directory
Get a file using TFTP
Get a file using TFTP
Put a file using TFTP
Put a file using TFTP
Create a file
5: Commands and Levels
117