Lantronix SGX 5150 Command Reference Manual page 201

no ssh username
protocol ssh
protocol telnet
remote address <text>
remote port <number>
show
show history
ssh username <text>
write
host 13 (tunnel-connect-host:4:13) level commands
address <text>
aes decrypt key <hexa-
decimal>
aes decrypt key text
<text>
aes encrypt key <hexa-
decimal>
aes encrypt key text
<text>
auto show statistics
clrscrn
credentials <text>
default protocol
default secure protocols
default tcp keep alive
default tcp keep alive
interval
default tcp keep alive
probes
exit
initial send binary <bina-
ry>
initial send set <text>
no address
no aes decrypt key
no aes encrypt key
no credentials
no initial send
no port
no ssh username
no tcp user timeout
SGX™ 5150 IoT Device Gateway Command Reference
Clears the SSH username associated with the host.
Sets the protocol to SSH.
Sets the protocol to Telnet.
Sets the IP address of the remote host to connect to when this host is selected on the login
connect menu. <text> = IP address.
Sets the remote port used to connect to the host. <number> = port to be used.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Sets the username for logging into the host via SSH. <text> = username.
Stores the current configuration in permanent memory.
Sets the remote host to establish tunneling connections with. <text> = IP address or host
name of the remote host.
Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by
two adjacent hex digits. Bytes may run together or be separated by optional punctuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value
if it contains spaces.
Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by
a single character. Note that quotes must enclose the value if it contains spaces.
Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is represented by
two adjacent hex digits. Bytes may run together or be separated by optional punctuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value
if it contains spaces.
Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is represented by
a single character. Note that quotes must enclose the value if it contains spaces.
show connection statistics
Clears the screen.
Selects the RSA/DSA certificates by name for the SSL client.
Restores the default connect mode tunneling protocol as 'TCP'.
Restores the default secure protocol selections.
Defaults the TCP keep alive idle time.
Restores the default 45 second connect mode TCP keep alive timeout.
Defaults the TCP keep alive probes.
Exits to the next higher level.
Sets the host connect tunnel Initial Send text allowing for binary characters. <binary> =
string in binary format that will be sent out the network upon connection. Within [] use bina-
ry decimal up to 255 or hex up to 0xFF.
Sets the host connect tunnel Initial Send text. <text> = ascii string that will be sent out the
network upon connection.
Removes the remote host address used to establish tunneling connections.
Removes the connect tunnel AES decrypt key.
Removes the connect tunnel AES encrypt key.
Clears the RSA/DSA certificate selection for the SSL client.
Removes the host connect tunnel Initial Send string.
Removes the remote port used to establish tunnel connections.
Removes the SSH user name.
Restores the default.
5: Commands and Levels
201