Weinmann MEDUMAT Easy CPR Instructions For Use Manual page 81

6.4.3 Ventilating the patient in continuous mode
Switching on continuous mode
Requirement •
•
•
•
1. Switch on the device using the On/Off button.
Result The device is operated in continuous mode.
Switching off continuous mode
1. Switch off the device
2. Change to manual mode
3. Change to demand flow mode
Result The continuous mode is switched off.
The device is ready for use
page 64).
The device is switched off
page 84).
A tidal volume and frequency are set on the adjusting knob for
ventilation parameters
and tidal volume", page
The patient is intubated.
page 84)
or
manual mode (CPR mode)", page 75)
or
patient in demand flow mode", page
(see "6.1 Preparing for ventilation",
(see "6.6 Switching the device off",
(see "6.2.1 Setting the respiratory rate
70).
(see "6.6 Switching the device off",
(see "6.4.2 Ventilating the patient in
(see "6.4.1 Ventilating the
73).
MEDUMAT Easy
6 Operation
CPR
EN 81