Weinmann MEDUMAT Easy CPR Instructions For Use Manual page 63

2. Simulate the inspiration trigger with one hand. To do this, press
the testing bag firmly together in your hand and then release
with a jerk.
• Check whether the device switches the flow on and
immediately off again. You can hear a slight click.
3. Switch off the device using the On/Off button. To do this, keep
the On/Off button depressed until all 4 alarm LEDs light up.
Then release the On/Off button.
4. CAUTION! Risk of injury from improperly removed
testing bag!
Grasp the testing bag by the connector and pull the bag and
connector off the patient valve.
5. Close the oxygen cylinder.
Result The demand flow mode has been checked.
The function check is complete.
5 Function check
CPR
MEDUMAT Easy EN 63