Weinmann MEDUMAT Easy CPR Instructions For Use Manual page 76

6 Operation
Result
76 EN MEDUMAT Easy
1. Press the Man. button.
The LEDs on the Man. button and on the MEDUtrigger display
the operational status.
Upon activation of the manual mode, continuous ventilation
with the set frequency stops.
If the button on the MEDUtrigger is pressed and the manual mode
is not activated, an information tone sounds. This occurs, for
example, if the Man. button or the button on the MEDUtrigger is
pressed in demand flow mode.
2. If necessary: Place the ventilation mask on the mouth and nose.
Hold the ventilation mask firmly in place.
3. Press the button on MEDUtrigger to ventilate the patient:
• To trigger a single mechanical breath, press the button on
the MEDUtrigger once.
or
• To trigger two mechanical breaths one after the other,
press and hold the button on MEDUtrigger.
A new mechanical breath can only be triggered if the inspiration
and expiration phase of the previous mechanical breath has
already ended.
An information tone sounds if the inspiration and expiration
phase has not yet ended.
The device is operated in manual mode.
CPR