Weinmann MEDUMAT Easy CPR Instructions For Use Manual page 74

6 Operation
Result
Result
74 EN MEDUMAT Easy
3. Place the ventilation mask on the mouth and nose. Hold the
ventilation mask firmly in place.
• With inspiration (triggering): Flow is switched on.
• At the start of expiration: Flow stops and the expiration air
is discharged via the patient valve.
4. Make sure that the patient breathes calmly and evenly.
If the device does not detect breathing within 20 seconds, the
/
pAW Apnea alarm is triggered.
The device is operated in demand flow mode.
Switching off demand flow mode
1. Switch off the device
page 84).
2. Turn the adjusting knob for ventilation parameters past the
snap-in position in a counterclockwise direction.
The demand flow mode is switched off.
CPR
(see "6.6 Switching the device off",