External Offset Coordinates: Ofs; Lp-Mxx6/Lp-Zxx6 "-165.000"-"+165.000 - Panasonic LP-M Series Serial Communication Manual

■ External offset coordinates: OFS

Sets offset coordinates used for "External Offset Function" to switch coordinates using I/O input.
Setting / Readout data of external offset
STX OFS
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
Readout request of external offset
STX OFS
Data length
Name
[byte]
Parallel data No.
X offset
Y offset
Z offset
(Effective only
LP-M/LP-Z
series)
θ offset
Power correction
* For the detail of the model type, refer to "Target laser marker" (P.4).
92
[Parallel data No.] [X offset] [Y offset]
Sub
[Z offset] [ θ offset] [Power correction]
[Parallel data No.]
R
4-byte
4 "0000"–"1023"
Model type*
8
LP-Sxx0(W)
LP-Sxx5(W)
LP-Sxx2
LP-Mxx0/LP-Zxx0
8
LP-Mxx5
LP-Mxx6/LP-Zxx6
Model type*
LP-Sxxx(W)
8
LP-Mxxx
LP-Zxxx
7 "-180.00"–"+180.00" [°]
3 "000"–"999"
38-byte
(Check sum)
Description
Setting range [mm]
"-045.000"–"+045.000"
"-080.000"–"+080.000"
"-027.500"–"+027.500"
"-060.000"–"+060.000"
"-110.000"–"+110.000"
"-165.000"–"+165.000"
Setting range [mm]
"+000.000" (fixed)
"-022.000"–"+022.000"
"-025.000"–"+025.000"
ME-LPMSZ-SR-9
(Check sum) Delimiter
Delimiter
Remarks
The parallel data number in which
offset is set is indicated.
• LP-Sxxx/LP-SxxxW:
As this item is not available
for the LP-S series, set to
"+000.000".
• LP-Mxxx/LP-Zxxx:
The offset of Z coordinate is
indicated.
The rotation offset is indicated.