Changing The Marking Files - Panasonic LP-M Series Serial Communication Manual

■ Control sample 2 : Changing the marking files
1. Laser pumping (ON)
2. File switching (File No. specified)
3. Shutter setting (open)
4. Status request
5. Marking trigger
Mark the same file.
7. Shutter setting (close)
8. Laser pumping (OFF)
Reference
• For LP-Mxxx-S type, open the laser gate to turn ON the ready signal.
Laser gate can be controlled with any timing regardless of the command sequence by the external signal input.
Remote mode ON
"READY": ON
Yes
Change the file
to be marked
To finish the
6. Change File No.
marking
SHT command
LSR command
Remote mode OFF
ME-LPMSZ-SR-9
LSR command
FNO command
SHT command
STS command
No.
MRK command
Change the file.
FNO command
Send STS command
again after a while.
27