Marking Status Transmission Permission: Mst; Setting / Readout Data Of Marking Status Transmission Permission; Readout Request Of Transmission Permission/Prohibition Of Response - Panasonic LP-M Series Serial Communication Manual

■ Marking status transmission permission: MST

Enables automatic response of marking result (e.g. normal end, and error occurrence, etc.) at the end of marking.

Setting / Readout data of marking status transmission permission

Sub
STX MST
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.

Readout request of transmission permission/prohibition of response

STX MST R
Data length
Name
[byte]
Transmission
permission/
prohibition
Data transmission after setting marking status transmission permission
The status is transmitted if the marking failure occurs when marking is normally completed or when character string is set
outside the marking area transmission permission when receiving a marking trigger by the serial communication command
after marking status transmission permission is set.
STX MST A
Data length
Name
[byte]
Status
Marking energy
measurement
(Effective only
LP-Mxxx /
LP-Sxxx)
Marking energy
value
(Effective only
LP-Mxxx /
LP-Sxxx)
Reference
• When marking status function is used, set the transmission permission before every shifting to the remote mode.
• When the remote mode is released, the marking status transmission is returned to the transmission prohibition.
• For the error code at marking operation, refer to "Error Indication" (P.178).
[Transmission permission/prohibition]
(Check sum) Delimiter
Description
"0": Transmission prohibited
1
"1": Transmission permitted
[Status] [Marking energy measurement]
[Marking energy value]
14-byte (LP-Mxxx / LP-Sxxx), 4-byte (LP-SxxxW/LP-Zxxx)
"0000": Marking is normally completed.
4
"E001"–"E999": Error code at marking operation
"0": Marking energy correct
"1": Marking energy incorrect
"2": Determination impossible
(1)
(when an error other than E710 occurs or after
the power check or laser power measurement
completes.)
"000000100"–"999999999" [mJ]
(9) It is valid in the correct operation and E710. In other
cases, "000000000" is indicated.
1-byte
Description
ME-LPMSZ-SR-9
(Check sum) Delimiter
Remarks
(Check sum) Delimiter
Remarks
The status after marking
operation is indicated.
Not transmitted for LP-
SxxxW/LP-Zxxx.
41