General Condition: Alc; Readout Request Of General Condition - Panasonic LP-M Series Serial Communication Manual

■ General condition: ALC

Sets the conditions related to whole file.
Setting / Readout data of general condition
STX ALC
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.

Readout request of general condition

STX ALC
Data length
Name
[byte]
X offset 8
Y offset 8
Z offset
(Effective only
8
LP-M / LP-Z
series)
Rotation offset 7
Overwriting
4
frequency
Overwriting
3
interval
Flip (Y axis
1
symmetry)
Flip (X axis
1
symmetry)
2D/3D
selection
(Effective only (1)
LP-M / LP-Z
series)
* For the detail of the model type, refer to "Target laser marker" (P.4).
Reference
• When marking on the flying object is valid, Overwriting Function cannot be used.
80
[X offset] [Y offset] [Z offset] [Rotation offset]
[Overwriting frequency] [Overwriting interval]
Sub
[Flip (Y axis symmetry)] [Flip (X axis symmetry)]
R (Check sum)
Description
Model type*
LP-Sxx0(W)
LP-Sxx5(W)
LP-Sxx2
LP-Mxx0/LP-Zxx0
LP-Mxx5
LP-Mxx6/LP-Zxx6
Model type*
LP-Sxxx(W)
LP-Mxxx
LP-Zxxx
"-180.00"–"+180.00" [°]
"0001"–"9999" [times]
"0.0"–"9.9" [sec] or "010"–"060" [sec]
"0": Inversion OFF
"1": Inversion ON
"0": Inversion OFF
"1": Inversion ON
• LP-Sxxx(W)
"0"
• LP-Mxxx/LP-Zxxx
"0": 2D marking
"1": 3D marking
[2D/3D selection]
Max. 41-byte
Delimiter
Setting range [mm]
"-045.000"–"+045.000"
"-080.000"–"+080.000"
"-027.500"–"+027.500"
"-060.000"–"+060.000"
"-110.000"–"+110.000"
"-165.000"–"+165.000"
Setting range [mm]
"+000.000"
"-022.000"–"+022.000"
"-025.000"–"+025.000"
ME-LPMSZ-SR-9
(Check sum)
Remarks
• LP-Sxxx/LP-SxxxW:
As this item is not available for the
LP-S series, set to "+000.000".
• LP-Mxxx/LP-Zxxx:
The marking position is offset to the
Z direction.
Marking is repeated by the repeat
number set. When the marking on the
flying object is valid, set "0001".
The interval period at overwriting
marking is set.
The character marked is inverted to the
Y axis.
The character marked is inverted to the
X axis.
• LP-Sxxx/LP-SxxxW:
As this item is not available for the
LP-S series, set to "0" or no data.
• LP-Mxxx/LP-Zxxx:
Selects 2D/3D marking.
Delimiter