Vertical Cone (Data Length: 77-Byte) - Panasonic LP-M Series Serial Communication Manual

2. Vertical cone (Data length: 77-byte)

Data length
Name
[byte]
Layer No. 2
Work shape 1
Center position X 8
Center position Y 8
Center position Z 8
Rotation angle X 7
Rotation angle Y 7
Rotation angle Z 7
Length/Height 7
Diameter 1 7
Diameter 2 7
Defocus 8
* For the detail of the model type, refer to "Target laser marker" (P.4).
Reference
• Set the values so that Diameter 2 is larger than Diameter 1 for vertical cone convex, or that the Diameter 1 is larger than
Diameter 2 for vertical cone concave.
• Set the defocus value so that the sum of the Z coordinate to be actually marked and the defocus value is in the range of
the interwork distance (specification value) +/-22.000 mm (LP-M) or +/-25.000 mm (LP-Z).
Description
"00"–"15"
"3": Horizontal cone convex
"4": Horizontal cone concave
"5": Vertical cone convex
"6": Vertical cone concave
Model type* Setting range [mm]
LP-Mxx0/LP-Zxx0 "-060.000"–"+060.000"
LP-Mxx5 "-110.000"–"+110.000"
LP-Mxx6/LP-Zxx6 "-165.000"–"+165.000"
"-090.00"–"+090.00" [°]
"-090.00"–"+090.00" [°]
"-180.00"–"+180.00" [°]
Model type* Setting range [mm]
LP-Mxx0/LP-Zxx0 "001.000"–"120.000"
LP-Mxx5 "001.000"–"220.000"
LP-Mxx6/LP-Zxx6 "001.000"–"330.000"
Model type* Setting range [mm]
LP-Mxxx "-022.000"–"+022.000"
LP-Zxxx "-025.000"–"+025.000"
ME-LPMSZ-SR-9
Remarks
The center coordinate of 3D work is
indicated.
Vertical cone length (lateral) or height
(vertical) is indicated.
The diameter of the top end (+ side
direction) of vertical cone is indicated.
The diameter of the bottom end (- side
direction) of vertical cone is indicated.
87