Qr Code Pattern: Qrp; Qr Code Pattern Setting; Readout Request Of Qr Code Pattern - Panasonic LP-M Series Serial Communication Manual

■ QR code pattern: QRP

Sets QR code module marking pattern.

QR code pattern setting

STX QRP
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.

Readout request of QR code pattern

STX QRP
Data length
Name
QR code No.
Margin pattern
Finder pattern
Alignment pattern
Dark module
Light module
pattern
Reference
• Setting with this command in the LP-F10W mode, the laser pulse cycle correction is set to 100%.
• For LP-SxxxW type, the laser pulse cycle correction setting does not affect the marking. Also this setting is not saved in
the file.
142
[QR code No.] [Margin] [Finder]
Sub
[Alignment] [Dark module] [Light module]
[QR code No.]
R
1-byte
Description
[byte]
1 "0"–"3"
Refer to "Character Code Table"
(P.186) for the character code. When
the marking cannot be done, set the
character code to "0000".
13
"000"–"200"
"050"–"200"
"050"–"200" (Specify "100" in
LP-F10W mode.)
13 Same as above
13 Same as above
13 Same as above
13 Same as above
66-byte
(Check sum)
Specifies a character code (a pattern code)
to use for the margin pattern.
Specifies a correction value of laser and
scan speed when marking the margin
pattern.
• Laser Power Correction (3-byte)
• Scan Speed Correction (3-byte)
• Laser Pulse Cycle Correction (3-byte)
Specifies the finder pattern. When "0000"
is specified for the character code, marking
is performed at the pattern setting of dark
module/light module. The other settings are
the same as those for the margin pattern.
When "0000" is specified for the character
code in the alignment setting, marking is
performed at the pattern setting of dark
module/light module. The other settings are
the same as those for the margin pattern.
Specifies the dark module pattern and the
details are the same as those for the margin
pattern.
Specifies the light module pattern and the
details are the same as those for the margin
pattern.
ME-LPMSZ-SR-9
(Check sum) Delimiter
Delimiter
Remarks