Timing Chart For Serial Offset Marking - Panasonic LP-M Series Serial Communication Manual

Timing chart for serial offset marking

The timing chart for the command for serial offset (SEO) is shown below.
ON
LASER IN
OFF
(Open)
SHUTTER ON
CONTROL
(Close)
INPUT
OFF
ON
TRIG. IN
OFF
ON
READY
OFF
ON
MARKING
OFF
Command Data
Response Data
Item Time
T1 1 second or more
T2 0 ms or more
Reference
• Transmission is available for the command for serial offset (SEO) only during remote control, and when the internal
shutter is opened ("Reception mode ON" is not set for command reception mode (MKM command)).
• When serial offset is set with external offset condition, data of set serial offset must be transmitted by every marking.
• For LP-Mxxx-S type, open the laser gate to turn ON the ready signal.
Laser gate can be controlled with any timing regardless of the command sequence by the external signal input.
90
T 1
SEOS SEOS
ACK
Remarks
SEO command cannot be sent until the shutter opens.
The shutter opens approx. 1 second after the shutter open input.
After confirming the marking output is turned ON, the next SEO command data can be sent.
ME-LPMSZ-SR-9
T2
ACK
SEOS
ACK