Display - Panasonic LP-M Series Serial Communication Manual

„ Display
Troubles
Touch panel console
shows nothing.
Touch panel console
does not respond to
screen tap.
Monitor shows nothing.
Mouse does not work.
(When the controller
is the PS/2 mouse
supported type )
Mouse does not work.
(When the controller
is the USB mouse
supported type )
Causes
Laser marker has not be started.
Power cable of console is not
connected.
Return harness is not connected.
Return harness is not connected.
Monitor is not turned on.
Monitor cable is not connected.
VGA-compatible monitor is not
connected.
Mouse relay cable is not connected.
(A mouse is plugged directly into
mouse connector on back of controller.)
The mouse is connected to the USB
hub.
The mouse type is not supported by
the laser marker.
ME-LPMSZ-SR-9
Measures
See remedial action against "Laser marker fails to
start up".
Check that console cable is securely connected
to connector [CONSOLE] on front of controller.
Connect return harness ([RETURN OUT] [VGA
OUT] [(VGA+RETURN) IN]) on the rear of the
controller.
Connect return harness ([RETURN OUT] [VGA
OUT] [(VGA+RETURN) IN]) on the rear of the
controller.
Check power to monitor.
Check that monitor cable is securely connected
to connector [VGA OUT] on back of controller.
Connect a VGA-compatible monitor.
Use mouse adaptor cable for the PS/2 type
mouse.
Connect the USB mouse to the laser marker
controller directly without USB hub.
Use the USB mouse with Human interface device
(HID) class.
167