■ Logo file: CDF
Sets the logo file.
Setting / Readout data of logo marking function
Sub
STX
CDF
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
Readout request of logo marking function
STX
CDF
R
Data length
Name
[byte]
Logo No.
2
Variable
Logo file name
length
Reference
• In the case of specifying logo file in VEC format, apply CDC command for setting logo condition, and in the case of
specifying logo file in DXF format, apply CDD command for setting logo condition.
• If readout data includes characters that cannot be expressed in ASCII code such as Katakana and Kanji (2-byte
character), these 2-byte characters are read out in shift-JIS code.
[Log No.] [Log file name]
Variable length
[Logo No.]
2-byte
Description
"00"–"99"
The long file name can be specified.
Except the extended characters,
entry of up to 10 Shift-JIS characters
or 20 ASCII code characters is
recommended.
ME-LPMSZ-SR-9
(Check sum)
(Check sum)
Delimiter
The logo file name corresponding to the
specified number is indicated.
The logo file setting will be deleted when no
file name is specified in this command.
• For VEC file, the extension can be
omitted (in this case, the response has an
extension.)
When the file name is "ABCD.VEC":
"ABCD" or "ABCD.VEC"
• For a DXF file, an extension is required.
When the file name is "ABCD.DXF":
"ABCD.DXF".
Delimiter
Remarks
71