Data Matrix Code Data (Shift-Jis Code Specified) : Dms; Data Matrix Code Data Setting; Readout Request Of Data Matrix Code Data - Panasonic LP-M Series Serial Communication Manual

■ Data Matrix code data (Shift-JIS code specified) : DMS

Sets character string to be encoded as a Data Matrix code by shift-JIS code.

Data Matrix code data setting

Sub
STX DMS
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.

Readout request of Data Matrix code data

STX DMS R
Data length
Name
[byte]
Data Matrix No.
Line No.
Data Matrix data Max. 60
Reference
• When setting Data Matrix data in multiple lines, data in each line are jointed in the order of line numbers and they are
coded as the data in one line. (No line break is inserted for each line.)
• When setting Data Matrix data in multiple lines, make sure the sum of code data is 255 characters or less.
• If readout data includes function characters (such as "%SFT:0"), the setting character ("%SFT:0") is read out, but
characters to be actually marked are not.
[Data Matrix No.] [Line No.]
[Data Matrix data]
Max. 62-byte
[Data Matrix No.] [Line No.]
2-byte
Description
1 "0"–"3"
1 "1"–"9"
Refer to "Setting method of
character string for marking
(specified with shift-JIS code)" (P.130)
for the detail of the setting method
of Data Matrix data.
ME-LPMSZ-SR-9
(Check sum)
(Check sum) Delimiter
Specifies the line for data setting.
Specifies the character setting in the
specified line. In case of Data Matrix code
marking, each line is connected in the order
of number, and barcode is generated.
Delimiter
Remarks
143