■ Character condition: STC
Sets the condition for marking character string per line.
Setting / Readout data of character condition
Sub
STX
STC
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
Readout request of character condition
STX
STC
1. When marking shape is straight line/proportional/justify
Data length : 77-byte (LP-Mxxx / LP-Sxxx / LP-Zxxx), 74-byte (LP-SxxxW)
Data length
Name
[byte]
Character
2
condition No.
Layer No.
2
Start line
2
End line
2
Marking
1
shape
Alignment
1
Character
7
height
Character
7
width
X position
8
Y position
8
82
[Character condition No.] [Layer No.] [Start line] [End line]
[Marking shape] [Vary with the marking shape]
[Font No.] [Bold line width] [Laser power correction]
[Scan speed correction] [Laser pulse cycle correction]
Max. 85-byte (LP-Mxxx / LP-Sxxx / LP-Zxxx),
Max. 82-byte (LP-SxxxW)
[Character condition No.]
R
2-byte
Description
"01"–"99"
"00"–"15"
"01"–"99" [row]
"01"–"99" [row]
"0": Straight line
"1": Proportional
"2": Justify
"0": Left
"1": Center
"2": Right
Model type*
LP-Sxx0(W)
LP-Sxx5(W)
LP-Sxx2
LP-Mxx0/LP-Zxx0
LP-Mxx5
LP-Mxx6/LP-Zxx6
Model type*
LP-Sxx0(W)
LP-Sxx5(W)
LP-Sxx2
LP-Mxx0/LP-Zxx0
LP-Mxx5
LP-Mxx6/LP-Zxx6
(Check sum)
Setting range [mm]
"000.100"–"090.000"
"000.100"–"160.000"
"000.100"–"055.000"
"000.100"–"120.000"
"000.100"–"220.000"
"000.100"–"330.000"
Setting range [mm]
"-045.000"–"+045.000"
"-080.000"–"+080.000"
"-027.500"–"+027.500"
"-060.000"–"+060.000"
"-110.000"–"+110.000"
"-165.000"–"+165.000"
ME-LPMSZ-SR-9
(Check
sum)
Delimiter
Remarks
The start and end line of character
string for marking with this condition is
indicated.
Sets the coordinate (X/Y) of the
character.
The base position of the coordinate
varies from "alignment" setting:
Left: lower left of the first character
Center: the center of the string
Right: lower right of the last character
Delimiter