■ File change [No. specified] : FNO
Specifies the file No. to change the file.
Setting / Readout data of file No.
STX
FNO
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
Readout request of file No.
STX
FNO
Data length
Name
[byte]
File No.
■ File change [Comment specified] : FNN
Changes file No. according to the file name (comment).
Change File No.
STX
FNN
Data length
Name
[byte]
File name
Max. 20
Reference
• When two or more of the same file names exists, the file with the smaller no. is selected.
■ File overwriting registration: FOR
Overwrite and register the file under editing.
Overwriting is possible when the file number has been already determined.
Overwriting of file
STX
FOR
44
Sub
[File No.]
4-byte
R
(Check sum)
Description
"0000"–"2047"
4
"9999": New file
[File name]
S
Max. 20-byte
Description
Specify the file name with 10 or less
characters of shift-JIS code or 20 or less
characters of ASCII code.
S
(Check sum)
(Check sum)
Delimiter
The file number to be used and the file number
currently being used is indicated at file No.
change and readout of file No. respectively.
(Check sum)
Delimiter
ME-LPMSZ-SR-9
Delimiter
Remarks
Delimiter
Remarks
Ex) When changing to a file name
(comment) with "ABCD", set as follows:
• When specifying the file name in shift-
JIS code:
82,60,82,61,82,62,82,63 (HEX)
• When specifying the file name in ASCII
code:
41,42,43,44 (HEX)