Lot Character String: Lts - Panasonic LP-M Series Serial Communication Manual

■ Lot character string: LTS

Sets the character string used for "Lot Function" to change characters depending on date/time and counter values.
Setting / Readout data of lot character string
STX LTS
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
Readout request of lot character string
STX LTS
Data length
Name
[byte]
Lot No. 1
Period No. 2
Start period 6
End period 6
Marking
character Max. 18
string
54
[Lot No.] [Period unit] [Start period]
Sub
[End period] [Marking character string]
Max. 33-byte
[Lot No.] [Period unit]
R
3-byte
Description
"0"–"7"
Period condition
Year, Week-
based year
Month
Day
Y/M
M/D
Hour
Minute
Hour/Min.
Week
Day of Week
Counter
Period condition
Year, Week-
based year
Month
Day
Y/M
M/D
Hour
Minute
Hour/Min.
Week
Day of Week
Counter
Use the shift-JIS code.
(Up to 9 characters)
(Check sum)
Setting range
"01"–"60"
"01"–"12"
"01"–"31"
"01"–"60"
"01"–"60"
"01"–"24"
"01"–"60"
"01"–"60"
"01"–"54"
"01"–"07"
"01"–"60"
Setting range
"198000"–"209900"
"000001"–"000012"
"000001"–"000031"
"198001"–"209912"
"000101"–"001231"
(The higher 4 characters:
month, the lower 2
characters: date)
"000000"–"000023"
"000000"–"000059"
"000000"–"002359"
"000000"–"000054"
"000000"–"000006"
("000000": Sunday,
"000006": Saturday)
"000000"–"999999"
ME-LPMSZ-SR-9
(Check sum) Delimiter
Delimiter
Remarks
"4"–"7": common lot
The setting range varies depending on
the condition of period unit.
The start/end period of marking
character string for setting is set.
The setting range varies depending on
the condition of period unit.
Set "??????" for both of start and end
period to delete it.
"??????" is indicated if the period
which has not been set is read out.
The character string to be marked with
the specified period is set. Specify
0-byte of data length to delete the
character string of period.