Processing Element: Fig; Setting / Readout Data Of Processing Element; Readout Request Of Processing Element - Panasonic LP-M Series Serial Communication Manual

Reference
• Use the CDC Command for the condition setting of VEC file. The common parameters with VEC and DXF files are
changed by either CDC/CDD command.

■ Processing element: FIG

Sets the processing element type (straight line, circle, arc) and coordinates.

Setting / Readout data of processing element

STX FIG
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.

Readout request of processing element

STX FIG
1. For straight line: (Data length: Max. 52-byte)
Data length
Name
[byte]
Processing
condition No.
Processing
element No.
Element type
X coordinate of
start point
Y coordinate of
start point
X coordinate of
end point
Y coordinate of
end point
Dashed line:
Length of solid
part
Dashed line:
Length of blank
part
For deletion of the processing element, set the element type to straight line, and set X and Y coordinates of both start and
end points to "0".
* For the detail of the model type, refer to "Target laser marker" (P.4).
74
[Processing condition No.] [Processing element No.]
Sub
[Element type] [depending on the element type]
[Processing condition No.] [Processing element No.]
R
2 "00"–"15"
3 "000"–"031"
1 "0": Straight line
8
Model type*
LP-Sxx0(W)
8
LP-Sxx5(W)
LP-Sxx2
8 LP-Mxx0/LP-Zxx0
LP-Mxx5
LP-Mxx6/LP-Zxx6
8
Model type*
LP-Sxx0(W)
LP-Sxx5(W)
(7)
LP-Sxx2
LP-Mxx0/LP-Zxx0
LP-Mxx5
LP-Mxx6/LP-Zxx6
Model type*
LP-Sxx0(W)
LP-Sxx5(W)
(7)
LP-Sxx2
LP-Mxx0/LP-Zxx0
LP-Mxx5
LP-Mxx6/LP-Zxx6
Max. 61-byte
5-byte
Description
Setting range [mm]
"-045.000"–"+045.000"
"-080.000"–"+080.000"
"-027.500"–"+027.500"
"-060.000"–"+060.000"
"-110.000"–"+110.000"
"-165.000"–"+165.000"
Setting range [mm]
"000.010"–"090.000"
"000.010"–"160.000"
"000.010"–"055.000"
"000.010"–"120.000"
"000.010"–"220.000"
"000.010"–"330.000"
Setting range [mm]
"000.000"–"090.000"
"000.000"–"160.000"
"000.000"–"055.000"
"000.000"–"120.000"
"000.000"–"220.000"
"000.000"–"330.000"
ME-LPMSZ-SR-9
(Check sum)
(Check sum) Delimiter
Remarks
Set the larger value than "Line width"
in laser setting screen.
To make it not dashed line (solid line),
input nothing.
To make it not dashed line (solid line),
input nothing.
Delimiter