Delay: Dly - Panasonic LP-M Series Serial Communication Manual

■ Delay: DLY

Sets the delay time and distance from trigger input to marking startup.
Setting / Readout data of delay
STX DLY
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
Readout request of delay
STX DLY
Data length
Name
Delay time/
distance
102
Sub [Delay time/distance]
6-byte
R (Check sum)
[byte]
• Delay Time: "000000"–"005000" [ms]
6
• Delay Distance: "000.00"–"500.00" [mm]
(Check sum)
Delimiter
Description
ME-LPMSZ-SR-9
Delimiter
Remarks
• When the moving speed is "still",
delay time is shown and the
marking start time after the trigger
input is displayed.
For LP-SxxxW type, only the delay
time can be set.
• When the moving speed is other
than "still", delay distance is shown
and the distance where the marking
starts after the trigger input is
displayed.