Processing Condition: Lay; Setting / Readout Data Of Processing Condition; Readout Request Of Processing Condition - Panasonic LP-M Series Serial Communication Manual

■ Processing condition: LAY

Sets X/Y coordinate offset and laser power correction ratio, etc. for the specified processing condition No.

Setting / Readout data of processing condition

Sub
STX LAY
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.

Readout request of processing condition

STX LAY R
Data length
Name
[byte]
Processing
condition No.
Layer No.
X offset
Y offset
Rotation angle
Laser power
correction
Scan speed
correction
(Laser pulse cycle
correction)
* For the detail of the model type, refer to "Target laser marker" (P.4).
[Processing condition No.] [Layer No.] [X offset]
[Y offset] [Rotation angle] [Laser power correction]
[Scan speed correction] [Laser pulse cycle correction]
36-byte (LP-Mxxx / LP-Sxxx / LP-Zxxx), 33-byte (LP-SxxxW)
[Processing condition No.]
2-byte
2 "00"–"15"
2 "00"–"15"
Model type*
8
LP-Sxx0(W)
LP-Sxx5(W)
LP-Sxx2
LP-Mxx0/LP-Zxx0
8
LP-Mxx5
LP-Mxx6/LP-Zxx6
7 "-180.00"–"+180.00" [°]
3 "000"–"999" [%]
3 "001"–"999" [%]
(3) "001"–"999" [%]
(Check sum)
Description
Setting range [mm]
"-045.000"–"+045.000"
"-080.000"–"+080.000"
"-027.500"–"+027.500"
"-060.000"–"+060.000"
"-110.000"–"+110.000"
"-165.000"–"+165.000"
ME-LPMSZ-SR-9
(Check
Delimiter
sum)
Delimiter
Remarks
• The correction ratio is calculated
using the value set at the laser
condition as 100%.
• With LP-SxxxW type, nothing
should be input in Laser Pulse
Cycle Correction.
77