Panasonic LP-M Series Serial Communication Manual page 125

■ Marking trigger: MRK
Inputs marking trigger (laser radiation startup trigger).
Setting / Readout data of marking trigger
STX MRK S
Data length
Name
[byte]
Marking trigger 1
Reference
• Marking is performed at command reception, regardless of the setting in "marking trigger" when "equidistant marking" is
set at the trigger type.
• When this command is sent when the marking trigger cannot be accepted (Ready is OFF), abnormal receiving response
is returned from laser marker.
[Marking trigger]
1-byte
Description
"0": Stop (available only with
"equidistant" status)
"1": Start
ME-LPMSZ-SR-9
(Check sum) Delimiter
• Marking operation is started when this command is
accepted.
• During "equidistant" status at marking to flying
object, the instruction of marking start/stop is
executed. (except LP-SxxxW type)
Remarks
125