Center; Radius; Lp-Sxx2 "000.000"-"055.000; Lp-Mxx0/Lp-Zxx0 "000.000"-"120.000 - Panasonic LP-M Series Serial Communication Manual

Data length
Name
[byte]

Center

8
position X
Center
8
position Y

Radius

8
Radius of
7
line interval
Start angle 7
Angle of
character 7
interval
Font No. 2
Bold line
5
width
Laser power
3
correction
Scan speed
3
correction
(Laser pulse
(3)
cycle cor.)
* For the detail of the model type, refer to "Target laser marker" (P.4).
Reference
• At marking of bold characters, set the values so ratio of character height to character width be within 1/10 to 10.
• Set the Bold line width to 1/2 or less of the character height or the character width, whichever is smaller.
84
Description
"-999.999"–"+999.999" [mm]
"+000.000"–"+999.999" [mm]
Model type* Setting range [mm]
LP-Sxx0(W) "000.000"–"090.000"
LP-Sxx5(W) "000.000"–"160.000"
LP-Sxx2 "000.000"–"055.000"
LP-Mxx0/LP-Zxx0 "000.000"–"120.000"
LP-Mxx5 "000.000"–"220.000"
LP-Mxx6/LP-Zxx6 "000.000"–"330.000"
"-180.00"–"+180.00" [°]
"-180.00"–"+180.00" [°]
Char. Font "01"–"10"
Model type* Setting range [mm]
LP-Sxx0(W)/LP-Sxx2/
"0.000"–"2.000"
LP-Mxx0/LP-Zxx0
LP-Sxx5(W)/LP-Mxx5/
"0.000"–"4.000"
LP-Mxx6/LP-Zxx6
"000"–"999" [%]
"001"–"999" [%]
"001"–"999" [%]
ME-LPMSZ-SR-9
Remarks
The center coordinate of arc is indicated.
The difference of radius from the center
position of marking position to the next line
is indicated when the character string is
marked over two or more lines.
The angle from the positive (+) side of
X coordinate with counter-clockwise at
the first character in character string for
marking is indicated.
The angle between the center of character
and the center of next character is
indicated.
The number corresponding to the 10 fonts
previously registered is indicated.
• The correction ratio is calculated using
the value set at the laser condition as
100%.
• With LP-SxxxW type, nothing should be
input in Laser Pulse Cycle Correction.