Mark Counter; Input The Function Character Of The Lot - Panasonic LP-M Series Operation Manual

1-3-4 Mark Counter

Sample
0001 0002
Initial value (Init)
End value (End)
Step
Counter source (Source)
Displayed number of digits (Figure) :
Display leading zeros (Zero Fill)
Type of base number
Set the counters shown above.
1. Set the Lot.

2. Input the function character of the lot.

3. Set the conditions of the function character of the lot and laser.
Refer to "3. Set the marking layout" (P.19) and "4. Set the laser condition" (P.20), "1-2-3 Set the marking data" (P.17).
Reference
• For details on the counter function, refer to "2-9-2 Counter" (P.120).
0003 ... 0998
: 1
: 1000
: 1
: Trigger signal
4
: Enable
: Base-10 (Decimal) number system
ME-LPMSZ-OP-7
0999 1000 0001 0002
35