Mark Code Symbol - Panasonic LP-M Series Operation Manual

1-3-5 Mark Code Symbol

Sample
The procedures to mark the above QR code at a center point with X coordinate=0 and Y coordinate=0 are described below.
1. Set QR code condition.
2. Set the data to be converted into QR code.
3. Set the pattern.
4. Set the laser setting of QR code.
Refer to "4. Set the laser condition" (P.20) in "1-2-3 Set the marking data" (P.17).
Reference
• For details on QR code marking, refer to "Setting for QR Code and Data Matrix Code" (P.167).
Bar Code Type
Version
Mode
Error correction level
Module H.
Module W.
Data
ME-LPMSZ-OP-7
: QR Code Model 2
: 0(Auto setting)
: Alphanumerical
: H
: 0.500 mm
: 0.500 mm
: ABCDEFGHIJKLMN12345
39