Enable Recording During On Demand Streaming; Figure 6-48 Enable On Demand - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

C O N F I G U R I N G M A X P R O N V R
6

Enable Recording During On Demand Streaming

Enable Recording During On Demand
Streaming
This feature helps user to enable recording during on demand video streaming. Earlier only
live video was supported.
For Event Based recording with ON demand streaming, Continuous Recording Schedule
option should be selected as None and Event based recording should be configured as 24/7
with condition that there will not be pre event recording only post event recording exists.
Note:
1.
2.
3.
Figure 6-48
4.
186
To set event based On Demand streaming recording, Continuous Recording
Schedule option should be selected as None and Event based recording should
be configured as 24/7, However, there will not be pre event recording only post
event recording exists.
User should associate alarms to the required camera(s), prior enabling On
Demand stream option.
Log on to MAXPRO NVR.
Navigate to Configurator > System tab.
Select Enable On Demand Stream check box as highlighted below.
Enable On Demand
Click Save. A message id displayed as shown below.
MAXPRO NVR 5.0 Installation and Configuration Guide