Table of Contents
Advertisement
M A X P R O N V R M O B I L E A P P
1 0
Introduction
3.
4.
244
In the Add Recorder screen:
•
In the NVR Name field, type the name (For example Demo/Site name) for the
NVR.
•
In the Local IP field, type the local IP address/Host name of the unit.
•
In the Remote IP field, type the remote IP address/Host name of the unit.
•
Type the Port number. The default port number is 443.
Apple mobile device
Tap Save to complete adding NVR
Recorder.
Log on: You can Log on in two ways, Manual and Finger Print Touch ID. (Finger Print
Touch ID logon is supported only for IOS devices).
•
For Manual Logon:
•
In the Username field enter the name that was created for the mobile device
user in MAXPRO NVR (see the
app
section on page 240).
•
In the Password field enter the appropriate password.
•
Under Connect to, ensure that your Recorder is selected or tap > to connect to
a different recorder.
•
Select the Remember User Name check box If you want the app to remember
the User Name for your future login.
•
(Only for Android Devices): Select the Validate Server Authenticity check box If
you want to validate the server.
•
Tap on Terms at the bottom of the screen to read the EULA terms and
conditions.
Android mobile device
Tap Save to complete adding NVR
Recorder.
Creating Users for the MAXPRO NVR Mobile
MAXPRO NVR 5.0 Installation and Configuration Guide
- Quick Links:
- Installing the Software in the Server...
Hide quick links:
Advertisement
Table of Contents
