Download  Print this page

Recording Operation - Honeywell CADVR-1004-WD-M User Manual

Hide thumbs

Advertisement

Channel is video when channel
1
video pictures showed this symbol
Channel open sound, the channel
3
video pictures showed this symbol

4.6 Recording operation

Customer can according to select the different kind of recording mode in this system. For the
different kind of recording mode you set, the channel will be showed the mark on everyone channel.
Manual recording
Note: Manual recording operational requirement the user should have "recording" permission.
Please make sure the hard disk drive has been installed and it has been formatted.
1)Input manual recording operation menu
Single click right key of mouse or In main menu=> recording control can into manual recording operation menu.
Under preview mode, press REC key or on the Remote controller unit key into recording control operation menu, as
follows:
2) The explanation of manual recording operation menu
【manual rec】 Priority level highest, no matter currently what status of every channel, after carry out the
manual press, corresponding channel will be record common in progress;
【Automatically】 Setting channel recording by setting condition to record under Timing, Motion detection and Alarm
in Recording Setting;
【Stop Rec】All video channel stop recording;
Channel happen when dynamic
2
test,
showed this symbol
23
channel
video
pictures

Advertisement

   Also See for Honeywell CADVR-1004-WD-M

   Related Manuals for Honeywell CADVR-1004-WD-M

Comments to this Manuals

Symbols: 0
Latest comments: