Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual page 33

UI Improvements
Improvements in Status Moni tor
System and Performance Improvements
MAXPRO NVR 5.0 Installation and Configuration Guide
In Fresh Installation Scenario
In case of Fresh Installation, the following are the recommendations:
• Only default username is displayed and the password field will be blank
• User must create new password
• In Create New Password dialog box, leave the Old Password field blanks and
proceed.
For better user experience and accessibility the following features are rearranged in Systems
tab
• Archival Schedule
• In camera level added after 30 minutes (s) as a new entry.
• Edge Sync Settings
• Privacy Protection Settings
• Additional status message Database Connection lost is included. This will help user
to know the status of database connection.
• Color Indications:
• Green: Everything is Fine
• Blinking between Yellow and Green: Not Recording
• Blinking between Yellow and Red: Database Connection Lost
• There is no Metadata from 5.0 Release onwards.
• No separate drive is required for Metadata
• New Recording file system with no Index files except PassIndex is introduced
and it is for per camera and per drive.
• Plug-in a new recording drive which can have recordings of another 5.0 NVR,
and play the same recordings by adding the same Unique Number of the
camera.
• Supports backward compatibility (5.0 version can play till 4.9 version recordings
(With Metadata) including 5.0 recordings). No recording loss in user's
perspective.
• Recording, Retrieval and Recycle features will have no dependency on index
files.
• PassIndex only use as catalyst
• New naming convention for Segment files (Num_StartTime_EndTime)
• Access recordings directly from recording drive
• Each recording drive is self sufficient
• XML Corruption recovery
• Auto recovery of corrupted XMLs by NEO on the run
• No functionality loss
I N T R O D U C T I O N T O M A X P R O N V R
MAXPRO NVR Features
33