S E T T I N G U P T H E M A X P R O N V R
3
Setting up the MAXPRO NVR Software-Only Solution
Setting up the MAXPRO NVR Software-Only
Solution
Setting up the MAXPRO NVR server and client computers is the first phase in the
commissioning process.
Before you Begin
Determine the following at the location.
Hardware Specifications
The MAXPRO NVR server and client computers must meet the minimum hardware
specifications, refer to the
MAXPRO NVR Software System Architecture
MAXPRO NVR software solution can be set up in the following two ways:
Corresponding system architectures are displayed below
MAXPR O NVR Software Sol u tion Standal one Sy st em
The following figure illustrates the MAXPRO NVR Standalone system.
Figure 3-5
52
•
Number of server and client computers required.
•
Hardware configuration of the computers.
•
Number of peripheral devices such as joystick controllers (Ultrakey keyboard), and
other devices that are needed.
MAXPRO NVR Software Data Sheet
•
Standalone System
•
Distributed System
MAXPRO NVR Software Solution Standalone System
for more information.
MAXPRO NVR 5.0 Installation and Configuration Guide