Recommendation To Use Low Bandwidth Stream Option - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

MAXPRO NVR 5.0 Installation and Configuration Guide
Recommendation t o use Low bandwidt h
stream option
Before enabling the Use Low resolution stream option in MAXPRO VMS you need to perform
the following:
1. In MAXPRO NVR Camera tab > Primary/Secondary Stream > Preference, select the
Secondary stream from the Low resolution drop down.
Note:
Set the Primary stream for recording which is 720p resolution and secondary
stream for Live which is 4CIF.
2. In MAXPRO VMS > Preferences > Advanced Tab > Low Bandwidth Stream Settings,
select the Use Low Resolution Stream check box.
The below table explains the parameter that you can set for Primary and Secondary Streams.
Primary /Main Stream
Codec Format
Resolution
FPS
Bit Rate Type
Bit Rate
C O N F I G U R I N G M A X P R O N V R

Recommendation to use Low bandwidth stream option

Secondary /Sub Stream
H.264B
720 P
(1280 x 720)
12
CBR
640 - 720
H.264B
VGA
(640x480)
5
CBR
192
183