Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual page 124

C O N F I G U R I N G M A X P R O N V R
6
Configuring the Disk Management Settings
Tip: By default, only the fixed drives are listed. See
fixed drive.
Note:
4.
Note:
124
• Storage Path - displays the default storage path for saving the recorded video. You
can type a new path for saving the recorded video
• Selected for Storage - By default, this check box is selected for all the fixed drives
that are listed except C: To disable video recording on a particular drive, clear the
Select for Storage check box corresponding to the drive.
• Total Space (GB) - displays the total space available on the drive.
• Free Space (GB) - displays the free space available on the drive.
• Current Recording Drive - displays a status indicator indicating that recording is
taking place on the drive. "Green" indicates that current recorded video is saved on
the drive.
• NAS Domain - displays the domain name of NAS
• NAS Username - Type the username to access the NAS
If the domain, username and password mismatches with the external drive (NAS)
credentials then TotalSpace(GB) column displays Invalid Drive message.
• NAS Password - Type the password to access the NAS
Under Disk Space
The overall drive statistics specified for the recorded video at any point of time is indicated
by the following fields:
• Total available disk space - displays the total storage space available on the drives
used for saving the recorded video.
• Used non video disk space - displays the disk space used by non video data on the
drives.
• Used video disk space - displays the disk space on the drives used for saving the
recorded video.
• Free disk space - displays the free disk space available on the drives.
The statistics provided in the Disk Space section does not include Archival
drives.
step 5 to explicitly add a network drive or
MAXPRO NVR 5.0 Installation and Configuration Guide