Getting To Know The Maxpro Nvr User Interface - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

MAXPRO NVR 5.0 Installation and Configuration Guide
An external MAXPRO NVR client can access the MAXPRO NVRs using the following settings:
• Server IP: 199.63.245.84
• Server Port: 20007
• Controller IP: 199.63.245.84
• Controller Port: 26026
• Storage Engine IP: 199.63.245.84
• Storage Engine Ports:10000 and 10010
Note:
In these scenarios, as ports are not mapped in the router, you can connect to
only one MAXPRO NVR from an external MAXPRO NVR desktop Client.
Getting to Know the MAXPRO NVR User
Interface
The user interface of MAXPRO NVR is easy-to-use with its intuitive icons and user-friendly
features. You can configure the devices in the video surveillance network through the
MAXPRO NVR user interface. The user interface consists of tabs, tree-structures, status bar,
floating windows, and icons. On opening the user interface, you see the following four tabs:
Viewer, Configurator, Search and Report. Based on the tab you select, windows, tree
structures, and other settings relevant to the tab appear on the screen.
A status bar is displayed at the bottom of the user interface. The status bar displays: the
connection status with the MAXPRO NVR server and controller, the status of clip creation, the
role of the user, the number of unacknowledged alarms, and the time.
Note:
The tabs that are displayed in MAXPRO NVR User Interface is dependent on the
user roles and privileges.
L O G G I N G O N A N D G E T T I N G S T A R T E D

Getting to Know the MAXPRO NVR User Interface

91