Adding A User; Figure 6-47 User Page - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

C O N F I G U R I N G M A X P R O N V R
6
Performing User Administration
privilege can add new users, assign roles to the added users, add or modify the privileges to
the users, and perform various configurations in MAXPRO NVR.

Adding a User

You can add a user by providing a unique user name and a password. Only the "NVR
Administrator role" user can add a new user in MAXPRO NVR. You can add up to 1024 users
in MAXPRO NVR. After you add a new user, you can assign a role to it.
To add a user
1.
2.
Figure 6-47
3.
4.
5.
6.
7.
8.
Note:
9.
180
Click the Configurator tab. The System page displays by default.
Click the User tab to navigate to the User page
User page
Click Add. A new row is created with a default set of values for the user.
Under the User Name column, the default user name is displayed. You can type a new
user name as applicable.
Under the Domain column, type the Windows domain name if the user is a Window's user
and is part of a Window's domain network.
Under the User Description column, type a description for the user.
Under the Role column, select the role you want to assign to the user from the drop-down
list.
Under the Password column, type the user's password.
Minimum length of the password is 6 characters. While adding a User, if the
password of other users added before 3.1 release is less than 6 characters then
an error message is displayed and all passwords need to be updated to meet the
minimum requirement.
Under the IsWindowsUser column, select the check box if the user is a Window's user.
Figure 6-47.
MAXPRO NVR 5.0 Installation and Configuration Guide