Figure 6-4 Installation Page - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

C O N F I G U R I N G M A X P R O N V R
6
Configuring the Honeywell cameras with MAXPRO NVR Wizard
Caution:
Note:
3.
Figure 6-4
114
• Click BACK to return to the CONFIGURATION page or click DONE when the
number of cameras discovered equals the number of connected cameras.
Only Honeywell IP cameras and HVE encoders (except Honeywell
Performance Series and New equIP® Series IP cameras) are discovered
and added in the MAXPRO NVR Wizard. To discover and add other third
party PSIA/ONVIF compliant cameras, see the
Third Party ONVIF and AXIS Cameras
and configuring third party RTSP cameras, the RTSP settings must be
specified, see Adding RTSP Cameras/Encoders
MAXPRO NVR Wizard discovers only 1 channel for multi-channel Encoders and
allows you to add only 1 channel from the wizard that is first channel. You can
add the additional channels from the Camera tab.
Step 3 - The INSTALLATION page
INSTALLATION page
Discovering and Adding
section on page 139. For adding
section on page 144.
(Figure 6-4) appears.
MAXPRO NVR 5.0 Installation and Configuration Guide