Record; Recording Configuration; Frame - Honeywell HRDP H.264 Rev B User Manual

Hide thumbs Also See for HRDP H.264 Rev B:

Table of Contents

Setup

Record

______________________________________________________________________________________________

ON/OFF – Enable or disable recording on individual camera channels.

SIZE – 352 × 240 / 704 × 240 / 704 × 480. [Resolution]

IPS – 1~30 [Recording Images Per Second]

QUALITY – Low / Normal / High

INTENSIVE – ON/OFF [Intensive Recording on sensor or motion event]

Note

When a motion or sensor event occurs, INTENSIVE RECORDING

automatically increases the recording rate to the maximum IPS that

is available (based on your current recording configuration frame

rate) up to 30 IPS per channel. If events occur on multiple channels

with intensive recording enabled, the available IPS is evenly

distributed across those channels.

PREALARM – 0~5 seconds [Pre-Alarm Recording]

POSTALARM – 0~30 seconds [Post Alarm Recording]

USED FPS – Displays the images per second (IPS) currently used, and the

total available IPS. HRDP models have a maximum of 480 IPS.

Table of Contents