Verifying the Configuration
Overview
Verifying the configuration of the MAXPRO NVR is the final phase in the commissioning
process. In this phase, you need to verify the working of the MAXPRO NVR.
Before you Begin
Ensure that the configuration of MAXPRO NVR is complete.
Activities to Perform in this Phase
In this phase, using the MAXPRO NVR user interface, check for the following one after the
other.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
MAXPRO NVR 5.0 Installation and Configuration Guide
Connection with the MAXPRO NVR sever (logging on)
Camera listing in the devices window
Live video display from cameras
Playback of recorded video
Inserting comments and marking the point of interest using the bookmark feature in
Timeline window
Playback of loop (mark in and mark out feature) in Timeline window
Panning, tilting, and zooming functions
Acknowledgement of alarms and clearing of alarms
Image creation
Clip creation
Video from the surrounding cameras (video pursuit or surrounding cameras feature in
MAXPRO NVR)
Saving the salvo layout using the salvo view feature
Searching recorded video in MAXPRO NVR
Generating and viewing the event and operator log report
7
195