Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual page 231

Step 2: Changing the Port in the MAXPRO Web Client and
MAXPRO Mobile app
MAXPRO NVR 5.0 Installation and Configuration Guide
3. Under Port Configuration:
• Http Port: If you want to change the http default port 80 to some other port number
then type the required port number and click Apply.
• Https Port: If you want to change the https default port 443 to some other port
number then type the required port number and click Apply.
Note:
Port change option in the configurator tool is available from 3.1 Build 65 Rev C or
higher version.
1. Launch MAXPRO Mobile by tapping
2. Before you log on: Tap + in the right hand side to add NVR
2. Add the MAXPRO NVR Server:
• Select whether you want to connect through Remote network or Local network
• In the name field, enter the name (For example Demo/Site name) for the NVR.
• In the IP Address field, type the IP address/Host Name of the unit
• Type the Port number. The default port number is 443.
• Tap Add.
To change the port in MAXPRO NVR Web Client:
• Type the URL https://<MAXPRO NVR Server IP or Computer/Machine
name>:<PORT>/MAXPROWEB/ in your web browser and then press Enter. The
log In page appears.
Note:
<MAXPRO NVR Server IP or Computer/Machine name> needs to be replaced
by the IP address or Computer/Machine name (as applicable) of the MAXPRO
NVR Server machine on which both the Web Server and the NVR Server are
installed by default. <PORT> needs to be replaced by the new port. For
example: if the port is changed to 1024 with the steps above, enter the URL as
https://74.x.x.x:1024/MAXPROWEB/
Caution:
For better security, close the browser upon logout.
M A X P R O N V R W E B C L I E N T
on your mobile device.
231