Warranty And Service; List Of Symbols - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

P R E C A U T I O N S

Warranty and Service

23. Circuit Overloading
24. Reliable Earthing (Grounding)
Warranty and Service
Subject to the terms and conditions listed on the Product warranty, during the warranty period
Honeywell will repair or replace, at its sole option, free of charge, any defective products
returned prepaid.
In the event you have a problem with any Honeywell product, please call Technical Support at
1-800-323-4576 (North America only) for assistance or to request a Return Merchandise
Authorization (RMA) number.
Be sure to have the model number, serial number, and the nature of the problem available for
the technical service representative.
Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped to
Honeywell without a clearly identified Return Merchandise Authorization (RMA) number
may be refused.

List of Symbols

The following is a list of symbols that might appear on the NVR.
22
Consideration should be given to connection of the equipment to supply circuit and the
effect that overloading of circuits might have on over-current protection and supply wiring.
Appropriate consideration of equipment nameplate ratings should be used when
addressing this concern.
Reliable grounding of rack mounted equipment should be maintained. Particular attention
should be given to supply connections other than direct connections to the branch circuit
(for example, use of power strips).
Symbol Explanation
The WEEE symbol.
This symbol indicates that when the end-user wishes to dis-
card this product, it must be sent to separate collection facili-
ties for recovery and recycling. By separating this product
from other household-type waste, the volume of waste sent to
incinerators or landfills will be reduced, and thus natural re-
sources will be conserved.
The UL compliance logo.
This logo indicates that the product has been tested and is list-
ed by the Underwriters Laboratories.
The FCC compliance logo.
This logo indicates that the product conforms to Federal Com-
munication's Commission compliance standards.
MAXPRO NVR 5.0 Installation and Configuration Guide