Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual page 116

C O N F I G U R I N G M A X P R O N V R
6
MAXPRO NVR Wizard Settings on the Task bar
Caution:
2.
3.
Note:
Tip: Set profiles if you have multiple MAXPRO NVR units and use the drop-down to choose
which NVR unit you would like to connect to.
4.
Note:
5.
6.
116
Only on the Honeywell provided systems shipped with v4.0 or later
version has a default Windows user name, NVR-Admin and password
Password$123 is already configured and hence you automatically log in.
Honeywell recommends you to create and use a new Administrator
account to install and configure MAXPRO NVR. See
Changing the default Windows Administrator Account Created By
page 66 section for more information.
Clear the Windows Logged-In User check box and then type the Username. The default
user name is admin.
Type your Password. The default password is trinity.
Select the Windows Logged-In User check box for logging on using the
Windows authentication (uses current logged in Windows account credentials). If
the Windows Logged-In User check box is cleared, the MAXPRO NVR user
name and password is used for authentication. If there is no profile set as default,
then select the Profile corresponding to the MAXPRO NVR server to which you
want to connect.
Select the Display Video on Alarm check box to display the viewer as an alarm monitor.
Alarm monitor supports pop-up of camera associated to IO events only. Pop-up
on motion alarms is not currently supported.
Click Login. The Viewer screen appears by default.
Click the Configurator tab to open the Configurator screen. The System page opens by
default.
Before you Begin -
NVR,
MAXPRO NVR 5.0 Installation and Configuration Guide