Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual page 207

Upgrade to MAXPRO NVR 4.7 Bui ld 188
MAXPRO NVR 5.0 Installation and Configuration Guide
Direct Upgrade to 4.7 is supported as explained below:
• From NVR 4.0 87 Rev H to NVR 4.7 Build 188
• From NVR 4.0 97 Rev B to NVR 4.7 Build 188
• From NVR 4.1 Build 123 Rev B to NVR 4.7 Build 188
• From NVR 4.5 Build 162 Rev B to NVR 4.7 Build 188
To upgrade to MAXPRO NVR 4.7 Service Pack
1. Double click MAXPRO NVR 4.7 Setup.exe. The WinRAR self extracts the files and
displays the Windows update message.
2. Click Yes to proceed, the installation wizard starts and the Welcome page appears.
Figure 8-8 Welcome Wizard
3. Click Continue to start the installation. The installation process continues and once the
installation is complete the completion page is displayed as shown below.
Note:
If Korean language is not installed in your previous build (such as NVR 4.5 Build
162) then a confirmation message to support Korean Language is displayed.
Click Yes if required.
U P G R A D E M A X P R O N V R S O F T W A R E
Overview
207