Changing Default Port 443 For The Maxpro Web Client And Maxpro Mobile App; Figure 9-14 Server Configuration - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

M A X P R O N V R W E B C L I E N T
9
Changing Default Port 443 for the MAXPRO Web
Client and MAXPRO Mobile app
Changing the default Port 443 for the MAXPRO Web Client and MAXPRO Mobile app is a two
step process:
1.
6.
Note:
Step 1: Changing the Default Port 443 on the MAXPRO NVR
By default, Port 443 is configured for the MAXPRO Web Client and MAXPRO Mobile app to
connect to the NVR. If you need to modify the default port, perform the following procedure. If
you require further assistance, please contact your Network Administrator.
1.
2.
Figure 9-14
230
Changing the port 443 on the MAXPRO NVR.
Changing the port in the MAXPRO Mobile app and MAXPRO Web Client.
MAXPRO NVR Web Client and MAXPRO Mobile app share a common port.
Different ports cannot be assigned to the Web Client and Mobile app.
Double-click on the desktop. The MAXPRO Web Configurator dialog box appears.
By default the System Configuration tab is selected.
Click the Server Configuration tab the following screen appears
Server Configuration
Figure 9-14.
MAXPRO NVR 5.0 Installation and Configuration Guide