Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual page 312

S E C U R I N G M A X P R O N V R
1 1
IPsec Policies for Secured Video Data Transmission
6.
7.
8.
9.
10.
312
Type the Name for the rule in the box provided and then click Finish.
Under Connection Security Rule, right-click on the rule created and then select
Properties as shown below.
In the Properties dialog box, navigate to Remote Computers tab as shown in the above
figure.
Verify the IP address and ensure that These IP addresses option is selected as shown
above.
Click Apply and then click OK.
MAXPRO NVR 5.0 Installation and Configuration Guide